Canon C5500 Series Troubleshooting Manual page 30

[Reference] This machine conducts learning function during this 10 seconds when going into sleep. If the sensor detects any
reflector within 1m during this learning period, the machine learns that object as a wall, and ignores all moving objects beyond
this distance.
B-4) Stand in front of the machine, and confirm that the machine recovers from sleep mode.
[Reference] Since the motion sensor detects people or objects that approach the sensor on the front side of the machine, it does
not detect a reflector right near the sensor window [a].
Action to be taken for C)
C) Change the sensibility of the motion sensor
C-1) Check and confirm that there are no other device using ultrasonic wave source, such as automatic door, insect repellent or
other motion sensors around the machine.
C-2) If possible, change the position or orientation of the machine.
C-3) From User mode > Settings/Registration > Preferences > Timer/Energy Settings > Use Motion Sensor > Sensor Sensitivity,
change the sensitivity, and then conduct actions B-1) to B-4).
C-4) In case of removing the obstructions is not possible, disable (turn OFF) the setting from User mode > Settings/Registration
> Preferences > Timer/Energy Settings > Use Motion Sensor
Target S/N of the Ultrasonic Motion Sensor
NOTE: All iR-ADV 4500 Series/iR-ADV C355 Series/iR-ADV C3500 Series are target machines.
iR-ADV C5500 Series
iR-ADV C5560I 120V
iR-ADV C5560I TW 120V
iR-ADV C5560I 120V G
iR-ADV C5550I 120V
iR-ADV C5550I TW 120V
iR-ADV C5550I 120V G
iR-ADV C5540I 120V
iR-ADV C5540I TW 120V
iR-ADV C5540I 120V G
iR-ADV C5535I 120V
iR-ADV C5535I TW 120V
iR-ADV C5535I 120V G
iR-ADV C5560 CN 220V
iR-ADV C5560I EUR 230V
iR-ADV C5560I 230V
iR-ADV C5560I LTN 230V
iR-ADV C5550 CN 220V
iR-ADV C5550I EUR 230V
iR-ADV C5550I 230V
iR-ADV C5550I 230V IND
iR-ADV C5550I LTN 230V
iR-ADV C5540 CN 220V
iR-ADV C5540I EUR 230V
Model Target Serial Number
XLA
XGW
XLF
XLG
XGY
XLH
XLJ
XHA
XLK
XLN
XJA
XLP
XGA
XMD
XKS
XLQ
XGN
XME
XKT
XGX
XMA
XGT
XMF
27