Table of Contents
Advertisement
1-8-4) Loosen the fixing screw [1] of the rear saddle alignment plate and fix it according the markings on the bracket.
[Note] When fixing the rear saddle alignment plate, hold the rear saddle alignment plate to avoid having it attached in a skewed
position.
[Note] When attaching the part, match the bottom marking to the marking in the center [1].
1-8-5) Attach the delivery guide unit [1] with the 2 stepped screws [2].
1-9) Attach the parts by reversing the procedure from the step 1-6)
2) Step to replace the saddle stopper assembly
2-1) Referring to "Removing the Saddle Unit" of Service Manual, remove the saddle unit.
2-2) Remove the 2 screws [1], and remove the saddle lower guide [2].
13
Advertisement
Table of Contents
