Table of Contents
Advertisement
2-3) Remove the 4 screws [1], and remove the saddle unit auxiliary caster [2].
2-4) Remove the 6 screws [1], and remove the cover [2] on the lower side of the saddle unit.
2-5) Remove the 4 connectors [1], 3 wire saddles [2], 3 wire clamps [3] and 1 edge saddle [4].
2-6) Remove the 5 screws [1], remove the saddle stopper assembly [2] in the arrow direction, and replace the saddle stopper
assembly with the saddle stopper assembly (FM1-R635-000) which was newly set up as a service part.
[Attention] When pulling out the assembly, don't catch the harness.
14
Advertisement
Table of Contents
