Table of Contents
Advertisement
This option can increase the
programme duration.
When the programme stops the display
shows a zero
, the indicator
steady on and the indicator
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
8.8 Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator
.
If you select the Cotton
programme at 40°C or 60°C
and no other options are set,
the display shows the
indicator
the standard cotton
programmes, the most
efficient programmes in
terms of combined energy
and water consumption.
8.9 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
is
8.10 Skipping phase button
starts
(Options)
By touching this button you can set:
• Rinse only at first touch. The washing
• Spin only at second touch. The
• Drain only at third touch. The
8.11 Delay Start
With this option you can delay the start
of a programme in a more convenient
; these are
time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
8.12 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
This option can also be used
to shorten the Steam
programme duration.
programme starts from the rinsing
phase by skipping the wash phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
appliance skips wash and rinse phase.
appliance performs only the drain
phase.
At firth touch the appliance
proposes the default setting
of the washing programme
again.
ENGLISH
19
.
and
Advertisement
Table of Contents
