Before First Use - AEG L9FSC949R User Manual

14 www.aeg.com
WARNING!
Pour the salt in the
compartment
WARNING!
Do not put anything but salt
in the compartment
any other detergent/additive
is poured inadvertently in
this compartment, please
refer to 'Eliminating
detergent or other additives
from salt compartment' in
'Troubleshooting' chapter.
Only use special salt for
dishwasher and/or washing
machine. Other types of
salts are less efficient and
over time could damage the
water softener technology
permanently. Do not use
fine salt!

6. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Make sure that there is salt in the
compartment marked by
the proper water hardness level.
Refer to "How to set the water
hardness level".
4. Pour 2 litres of water into the
detergent compartment marked by
.
Salt
only.
Salt
. If
Salt
and set
The appliance works
normally even without salt,
but without exploiting its full
potential. If using the
appliance without salt for a
long time, once the salt is
finally refilled, the water
softener function is
completely restored after a
few long washing cycles.
This action activates the drain system.
5. Pour a small quantity of detergent
into the compartment marked by
.
6. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.