Hob - Daily Use - AEG CIS6742ECM User Manual

Only the top oven works
without the set time.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
5.4 Changing the time
You cannot change the time
of day if any of the functions
operates.
Press again and again until the
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".

6. HOB - DAILY USE

WARNING!
Refer to Safety chapters.
6.1 Hob control panel
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
or to set the correct
1
9
5.5 Preheating
Preheat the empty oven before first use.
Preheat the two ovens
before first use. Heat up one
oven at a time.
Set the functions listed
below, if applicable.
1. Set the function
temperature to 250ºC.
2. Let the oven operate for 1 hour.
3. Set the function
temperature to 250ºC.
4. Let the oven operate for 15 minutes.
5. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
2 3
8
ENGLISH
. Set the
. Set the
4
5
6
7
11