Panasonic EP-MA100 Operating Instructions Manual page 65

Screen displays during massaging operations
⁃
Press the displayed buttons to operate.
⁃
The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes.
<Viewing screens>
The "Full body auto massage" course is used as an example for the screen displays shown below. Buttons and status
displays vary, depending on the selected course.
User display
• The selected user is displayed.
(EN22 to EN24)
• The display is not shown when
"Guest" is selected.
Returns to the previous screen
Displays the operation
(
EN26)
Display of the operation, position, and pressure
⁃
The statuses of massage rollers in operation, as well as sole and air are displayed.
(The display indicates rough movements; Actual movements or sensations may vary.)
Massage rollers
• The color becomes darker as
the pressure on the massage
rollers becomes higher.
⁃
The screen on the right is displayed when the
Air course or operations for body parts that only
activates air is selected.
(See EN26 for regarding air massage.)
Displays the course (EN23 to EN25)
Operations can be adjusted (EN30 to EN34
⁃
The display of body parts can be switched between upper half
of body and full body.
⁃
The display of body parts cannot be switched while the
program is being edited. (EN25)
Press
Sole
• rotates during
operation.
Displays the remaining time
Settings button (EN35)
Help button (EN35)
• Settings button and Help button
are displayed regardless of the
selected course.
).
Press
Air (Example: In case of air arm course)
Setting of air: Off
Setting of air: On
Air operating
The color of the
body part changes
continuously.
Arm/Leg/Sole actions
Turning operations OFF/
ON, Intensity of actions
display (EN32 to EN33)
EN17