Panasonic EP-MA100 Operating Instructions Manual page 59

●
Lock switch key (1 pc.)
This is initially
inserted in the lock
switch of the power
switch section prior to
leaving the factory.
4) Turn on the power and raise the
backrest to the upright position
①
Insert the power plug into the power outlet.
• Always be sure to insert into an AC 220 V plug.
②
Confirm the lock switch key is set to the "打开" (open) position.
③
Confirm the power switch is set to the "开" (on) position.
②
④
Press on the controller
twice.
• Press once, and then
press again approx.
1 second later. Backrest
will rise automatically.
●
Allen key (1 pc.)
(Cross section)
4 mm
③
●
Attachment screws
(M6 x 29), Silver
(2 pcs)
Unit Body
Rear Side
Watch your
step to prevent
tripping on
power cord or
①
AC 220 V
the like.
EN11