Formatted Capacity; Lba Mode - Seagate ST1500LM012 Product Manual

Mobile hdd
Table of Contents

Advertisement

Table 2
Drive Specifications Summary (continued)
Drive Specification
Vibration, non-operating
Nonrecoverable read errors
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1.
One GB equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
If the drive is powered-off before issuing flush cache command, in some instances,
Note
the end user data in the DRAM cache might not be committed to the disk.
2.1

Formatted Capacity

Model
Formatted Capacity
2TB model
2000 GB
1.5TB model
1500 GB
1TB model
1000 GB
500GB model
500 GB
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary
depending on operating environment and formatting.
2.1.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed
sectors as defined above.
Refer to
Configuring and Mounting the Drive
of drives with capacities over 137 GB.
Seagate Mobile HDD Product Manual, Rev. A
ST1000LM035
and ST1000LM038
Average annualized workload rating: <55 TB/year.
The specifications for the product assumes the I/O workload does not exceed the average annu-
alized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may degrade
and impact reliability as experienced by the particular application. The average annualized
workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for the drive.
(1)
Guaranteed Sectors
3,907,029,168
2,930,277,168
1,953,525,168
976,773,168
on page 24 (words 60-61 and 100-103) for additional information about 48-bit addressing support
ST500LM030, ST500LM032
5–500 Hz: 5.0 Gs
14
1 per 10
bits read
600,000 at 25°C, 50% rel. humidity
Yes
Bytes per Sector
512 (logical) /
4096 (physical)
Drive Specifications
and ST500LM033
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents