Table of Contents
Advertisement
www.seagate.com
2.2
Formatted capacity
ST models
Formatted capacity*
ST16000VE000
16TB
ST12000VE0008
12TB
ST10000VE0008
10TB
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
NOTE
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is
the number of guaranteed sectors as defined above.
See
Section 4.3.1, "Identify Device command"
addressing support of drives with capacities over 137GB.
2.3
Recording and interface technology
Interface
Recording method
Recording density, KBPI (Kb/in max)
Track density, KTPI (ktracks/in avg)
2
Areal density (Gb/in
avg)
Spindle speed (RPM) (± 0.2%)
Internal data transfer rate (Mb/s max)
Sustained data transfer rate (MB/s max)
I/O data-transfer rate (MB/s max)
Seagate SkyHawk AI Serial ATA Product Manual, Rev. E
Guaranteed sectors
31,251,759,104
23,437,770,752
19,532,873,728
LBA Counts for drive capacities greater than 8TB are calculated based upon the
SFF-8447 standard publication.
Serial ATA (SATA)
Perpendicular
2426
436
1028
7200
2833
250
600 (Ultra DMA mode 5)
Bytes per logical sector
512E
ftp://ftp.seagate.com/sff/SFF-8447.PDF
(words 60-61 and 100-103) for additional information about 48-bit
Drive specifications
9
Advertisement
Table of Contents
