Formatted Capacity; Lba Mode; Recording And Interface Technology; Start/Stop Times - Seagate IRONWOLF NAS ST14000VN0008 Product Manual

www.seagate.com
1.2.2

Formatted capacity

ST models Formatted capacity*
ST14000VN0008 14TB
ST12000VN0008 12TB
ST10000VN0008 10TB
*One GB equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
NOTE
1.2.2.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is
the number of guaranteed sectors as defined above.
See
Section 1.4.3.1, "Identify Device Data log"
addressing support of drives with capacities over 137GB.
1.2.3

Recording and interface technology

Interface
Recording method
Recording density, KBPI (Kb/in max)
Track density, KTPI (ktracks/in avg)
2
Areal density (Gb/in avg)
Spindle speed (RPM) (± 0.2%)
Internal data transfer rate (Mb/s max)
Sustained data transfer rate (MiB/s max)
I/O data-transfer rate (MB/s max)
1.2.4

Start/stop times

Power-on to Ready (sec) (typ/max)
Standby to Ready (sec) (typ/max)
Ready to spindle stop (sec) (max)
Seagate IronWolf Serial ATA Product Manual, Rev. C
Guaranteed sectors
27,344,764,928
23,437,770,752
19,532,873,728
LBA Counts for drive capacities greater than 8TB are calculated based upon the
SFF-8447 standard publication.
Serial ATA (SATA)
Perpendicular
2426
436
1058
7200
2833
210
600 (Ultra DMA mode 5)
23/30
23/30
20
Bytes per logical sector
512E
ftp://ftp.seagate.com/sff/SFF-8447.PDF
(words 60-61 and 100-103) for additional information about 48-bit
Drive specifications
9