Frequency-Watt Control - YASKAWA SOLECTRIA XGI 1500 SOLECTRIA XGI Manual

Modbus Map SOLECTRIA XGI 1500 (Rev A)
9

Frequency-Watt Control

This function helps to change inverter active power output with fluctuations in grid frequency. This will
provide frequency support to the electric grid. As frequency increases, the desired response of the inverter is
to decrease active power output.
The image below shows the default setting of Freq-Watt Control. The default state of this function is
deactivated.
Example:
If the cutomer wants to enable this funtion. The procedure via the web-based GUI is shown below.
DOCR-XXXXXX 17 of 30