Advertisement
C harging with a PC
Connect this terminal to a PC by the microUSB
Cable 01 (optional) to charge.
Insert the microUSB plug of microUSB
a
Cable 01 into the microUSB
connection terminal of this terminal
• Insert the microUSB plug horizontally with
the side of B mark facing up.
Connect the USB plug of microUSB
b
Cable 01 to the USB port on PC
• If a request of installing a device driver
appears on your PC, cancel it.
• If the "Install PC programs" screen is
displayed on this terminal, tap "Cancel".
When charging is fi nished, remove
c
the USB plug of microUSB Cable 01
from the USB port on PC
Remove the microUSB plug of
d
microUSB Cable 01 from this terminal
Note
• Depending on the PC conditions, it may
take a while to fi nish charging, or it may
not be able to charge.
Confi rmation and Settings before Using
50
P ower On/Off
P ower On
Press and hold the power key for
a
over two seconds
• This terminal vibrates and the lock screen
is displayed after a while.
• After purchasing this terminal, when it is
turned on for the fi rst time, follow the on-
screen instructions to perform the initial
settings (P64).
P ower Off
Press and hold the power key for
a
over two seconds
"Power off "
b
"OK"
c
Advertisement
