Advertisement
N otes on Holding over Device
Notes when holding over reader, NFC Modules
built-in device, etc.
• When holding over
the device slowly.
• Hold the
mark parallel to the center of
reader. If it cannot be scanned even with it
held in front of the center scanner, slightly
lift up this terminal, or move it backwards/
forwards or to the left/right.
• When there is a metal object between the
mark and the device, reading may fail. Note
that putting this terminal into a case or cover
may aff ect communication performance, take
it out from case or cover.
Apps
140
mark, bring it close to
L ocking Osaifu-Keitai
Use "NFC/Osaifu-Keitai lock" to lock the
Osaifu-Keitai service from being used. Locking
of Osaifu-Keitai is diff erent from screen lock
and UIM card lock.
From the Home screen, "Apps" X
a
"Osaifu-Keitai"
"Lock Settings" X Enter a password
b
X "OK"
• Setting password is required for the
fi rst activation. Follow the on-screen
instructions to set password.
■
To unlock
"Lock Settings" X Enter the password X
"OK".
■
To change password
From the Home screen, "Apps" X
"Settings" X "More..." X "NFC/Osaifu-
Keitai settings" X "Lock password
change" X input the current lock
password X input a new lock password
X "OK" X input the new lock password
again X "OK".
Advertisement
