Icemaker - Hoshizaki KM-470AJ Instruction Manual

1. Icemaker

Icemaker Water Minimum Icemaker
Supply Inlet Water Supply Line Size
1/2" Female Pipe 3/8" Nominal ID Copper
Thread (FPT) Water Tubing or
Equivalent
• An icemaker water supply line shut-off valve and drain valve must be installed.
• Be sure there is sufficient extra water supply line and drain line for the appliance to be
pulled out for service.
Icemaker
Drain Outlet
3/4" FPT
Icemaker
Condensation
Drain Outlet
3/8" OD Hard
Tube
Bin Drain Outlet
3/4" FPT
Fig. 5
Air-Cooled Models and Remote Models
Model Shown:
KM-470AJ/
KM-470AJ-S
Icemaker Drain
Outlet
3/4" Female Pipe
Thread (FPT)
Icemaker Water Supply Inlet
1/2" FPT
Icemaker
Ice
Storage
Bin
Minimum 3/4" Nominal ID
Hard Pipe or Equivalent
Minimum Icemaker
Drain Line Size
3/4" Nominal
ID Hard Pipe or
Equivalent
Minimum 3/8" Nominal ID Copper
Water Tubing or Equivalent
Drain Valve
13
ENGLISH
Condensation
Drain Outlet
3/8" OD Hard
Tube
Shut-Off Valve
Vent Tube
Be sure there is sufficient
extra water supply line and
drain line for the appliance
to be pulled out for service.
Separate piping to
approved drain. Leave
a 5-cm vertical air gap
between the end of each
pipe and the drain.
5-cm air gap
Floor Drain