Table of Contents
Advertisement
II. Installation and Operating Instructions
• The appliance must be installed in accordance with applicable national, state, and
local codes and regulations.
• Failure to install, operate, and maintain the appliance in accordance with this
manual will adversely affect safety, performance, component life, and warranty
coverage and may result in costly water damage.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after installation. Make sure that none have fallen into the
dispenser unit/ice storage bin.
A. Location
• The icemaker is not intended for outdoor use. Normal operating ambient
temperature must be within 7°C to 38°C; Normal operating water temperature
must be within 7°C to 32°C. Operation of the icemaker, for extended periods,
outside of these normal temperature ranges may affect icemaker performance.
• The icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to go
below 0°C. See "IV. Preparing the Icemaker for Periods of Non-Use."
• The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• For KM- 470A - J/KM-470A - J-S models, allow 30 cm clearance at rear, sides, and top for
proper air circulation and ease of maintenance and/or service should they be required.
• The location should provide a firm and level foundation for the appliance.
WARNING
NOTICE
7
ENGLISH
Advertisement
Table of Contents
