Toshiba SD-K220 Owner's Manual page 33

Clock/counter display
Press CLOCK/COUNTER. The clock and tape counter
alternate with each other in the display window.
COUNTER
CLOCK
Press DVD/VCR. The DVD mode and the VCR mode
alternate with each other in the display.
DVD mode
VCR mode
Notes:
• If you rewind the tape beyond "00:00:00", a minus sign ("–")
will be displayed in front of the time.
• When you load a tape, the counter will reset to "00:00:00".
• The counter does not function on nonrecorded (blank)
sections of the tape. When you rewind, fast forward or play
tapes through blank sections, the counter stops.
2C31101A (E)p26-37 33
Video index search system
This function enables you to locate the beginning of any recording
made on the VCR.
Recording an INDEX mark
The Index Search function auto-
matically records an INDEX mark
on the tape whenever a record-
ing is initiated.
Index search
Press INDEX + or – during stop or play mode.
For Succeeding programs: Press INDEX +.
For Preceding programs: Press INDEX –.
(As many as 9 index points can be accessed via this
method.)
When the INDEX + or – is pressed,
the unit starts searching the
INDEX NO. selected and finds
the portion, then playback starts
automatically. To stop the Index
Search, press STOP.
Notes:
• When you record an INDEX mark at the very beginning of the
tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play at a
slightly different location.
• INDEX may not function properly with old or worn out video tapes.
• INDEX marks may not be found if it is extremely close to the point
where the search began.
• In recording, if you stop recording temporarily, the INDEX mark is
not recorded on the tape.
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
S-VHS system.
However, the picture will not have the high resolution of
S-VHS system.
Note: You cannot record S-VHS video format with this
11/22/02, 15:42
DVD/VCR
CLOCK COUNTER
STOP
INDEX /
+ –
CH 001
INDEX
+3
or is displayed
INDEX NO. (up to 9)
VCR.
33