Connecting To A Tv - Toshiba SD-K220 Owner's Manual

Connections

Connecting to a TV

Connect the DVD/VCR to your TV.
Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you
also connect the S-video or ColorStream
Connecting to a TV
Signal flow
To wall outlet
Notes:
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
18
2C31101A (E)p18-25
®
component video outputs to your TV/monitor. (see page 19.)
18
LINE IN
P /
P /
7235490032
(yellow) (red) (white)
To VIDEO
Audio/video cable (supplied)
OUT
To video input
(yellow)
11/22/02, 15:42
To ANALOG AUDIO OUT
To audio inputs
(red) (white)
TV or monitor with
audio/video inputs