Tuner Setting - Toshiba SD-K220 Owner's Manual

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR's memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
TV/CATV selection
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the VCR mode. (The
VCR indicator will light.)
1 Press VCR MENU. Press SET + or – to select
"CH SETUP", then press ENTER.
TRACKING/ SET +
TRACKING/ SET –
2
Press SET + or – to select "TV/CATV".
TRACKING/ SET +
TRACKING/ SET –
3 Press ENTER to select the TV or CATV mode.
The arrow indicates the selected mode.
TRACKING/ SET +
TRACKING/ SET –
TV - VHF/UHF channels
CATV - CABLE TV channels
4
Press VCR MENU until the menu screen is
cleared.
Note:
You can't select "CH SETUP" if you set the channel to "L1" or
"L2".
2C31101A (E)p26-37
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
á ñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
27
Setting channels automatically
1
Repeat left step 1 and press SET + or – to
select "AUTO CH MEMORY".
TRACKING/ SET +
TRACKING/ SET –
2
Press ENTER.
Auto tuning will begin. The channel
display will count up and when fin-
ished, the screen returns to normal.
TRACKING/ SET +
TRACKING/ SET –
11/22/02, 15:42
1, 2
1, 3
1, 4
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
CH 002
27