Table of Contents
Advertisement
Table of contents
3.2
Integrating the library into STEP 7 V13
In order that the previously described functions of the SMS_sr_xxxx can be used, it
is necessary to integrate the library into the configuration software first. The
necessary steps are listed in the following table.
Table 3-3
No.
1.
The library is available on the HTML page from which you downloaded this
document (\
hard drive.
2.
Unzip the library.
3.3
Integrating the library blocks into the STEP 7 V13
project
The table below lists the steps for integrating the blocks of the
SMS_MD720-3_Library_V13 into your STEP 7 project. Subsequently, you can
use the blocks of library.
Table 3-4
No.
1.
Open the existing STEP 7 V13 project.
2.
In the "Global Libraries" palette, click on "Open global library" in the toolbar or
select "Global libraries > open library..." in the "Options" menu.
The "Open global library" dialog box opens.
3.
Select the global SMS_MD720-3_Library_V13.al12.
Sending and Receiving SMS Messages with MD720-3
Entry ID: 25545680,
V1.0,
1
\). Save the SMS_MD720-3_Library_V13_V1_0.zip library to your
12/2013
Procedure
Procedure
20
Advertisement
Table of Contents
