Table of Contents
Advertisement
Table of contents
2.2
FB SMS_sr_CM_PtP
The following figure and table show the call interface of the SMS_sr_CM_PtP
library block (for communication module CM PtP).
Figure 2-1
Table 2-2
Symbol
EN
HW_ID
PIN_CODE
TELNO
MESSAGETEXT
SMS_SCA
INIT
Sending and Receiving SMS Messages with MD720-3
Entry ID: 25545680,
V1.0,
Data type
BOOL
Release input.
PORT
Hardware identifier of CM PtP (central at the S7-1500 or
distributed as module of ET 200SP). The value of the HW
identifier is available in HWCN.
STRING[10]
PIN of the SIM card in the modem
Example: 'xxxx$R' > '1234$R'
Make sure that you replace only the PIN (+49xxxxxxxxxx).
The "$R" control character must not be deleted!
STRING[24]
Recipient's telephone number of the device to which the
SMS message is to be sent.
Example: ' "+49xxxxxxxxx"$R' > ' "+49123456789"$R'
Make sure that you replace only the telephone number
(+49xxxxxxxxx). The "$R" control character and the
quotation marks must not be deleted!
Permissible value: Max. 24 characters
STRING[160]
Content of the SMS message to be sent.
Maximum text length: 159 characters (without quotation
marks)
Example: 'Point to Point Communication'
STRING[24]
The short message service center of your provider has to be
entered here
Example: ' "+49xxxxxxxxx"$R', "+49123456789"$R'
Make sure that you replace only the telephone number
(+49xxxxxxxxx). The "$R" control character and the
quotation marks must not be deleted!
Permissible value: Max. 24 characters
List (e.g. for Germany, see \
BOOL
Activates the initialization process
Reacts only to a positive edge
Deletes all SMS messages stored in the modem.
12/2013
Explanation
7
\):
10
Advertisement
Table of Contents
