Warranty And Liability - Siemens MD720-3 Manual

Warranty and Liability

Warranty and Liability
Note The Application Examples are not binding and do not claim to be complete
regarding the circuits shown, equipping and any eventuality. The application
examples do not represent customer-specific solutions. You are responsible for
ensuring that the described products are used correctly. These application
examples do not relieve you of the responsibility to use safe practices in
application, installation, operation and maintenance. When using these
application examples, you recognize that we cannot be made liable for any
damage/claims beyond the liability clause described. We reserve the right to
make changes to these Application Examples at any time without prior notice. If
there are any deviations between the recommendations provided in these
Application Examples and other Siemens publications – e.g. Catalogs – the
contents of the other documents have priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of
the examples, information, programs, engineering and performance data etc.,
described in this application example will be excluded. Such an exclusion will not
apply in the case of mandatory liability, e.g. under the German Product Liability Act
("Produkthaftungsgesetz"), in case of intent, gross negligence, or injury of life, body
or health, guarantee for the quality of a product, fraudulent concealment of a
deficiency or breach of a condition which goes to the root of the contract
("wesentliche Vertragspflichten"). The damages for a breach of a substantial
contractual obligation are, however, limited to the foreseeable damage, typical for
the type of contract, except in the event of intent or gross negligence or injury to
life, body or health. The above provisions do not imply a change of the burden of
proof to your detriment.
Any form of duplication or distribution of these application examples or excerpts
hereof is prohibited without the expressed consent of Siemens Industry Sector.
Caution
The functions and solutions described in this entry predominantly confine
themselves to the realization of the automation task. Please furthermore take into
account that corresponding protective measures have to be taken in the context of
industrial security when connecting your equipment to other parts of the plant, the
enterprise network or the Internet. For more information, please refer to entry ID
50203404.
http://support.automation.siemens.com/WW/view/en/50203404
Sending and Receiving SMS Messages with MD720-3
Entry ID: 25545680, V1.0, 12/2013
2