Mirroring Mode - Acer AR160 F1 Series User Manual

46

Mirroring mode

• For mirroring mode, the memory contains a primary image and a
copy of the primary image. Therefore, the effective size of
memory is reduced by at least one-half.
• Channels 3 has no function and cannot be populated in this mode.
• Follow the population rules described in independent mode.
• DIMM modules installed in channels 1 and 2 must be identical —
1A and 2A should be the same type, size and manufacturer.
1B and 2B memory should be the same type, size and
manufacturer. However, it is not necessary for slot A to have the
same memory module as slot B within a channel.
• The same rule applies to processor 2.
Memory population for mirroring mode
Single processor configuration
Single processor
Channel 1
Configuration 1B
A
B X
Dual processor configuration
Channel 1
Configuration 1B
A
B
C X
D X
Notes: 1. Place DIMMs in "X" location.
Processor 1 P1DIMM slots
Channel 2 Channel 3
1A 2B 2A 3B
X X NA
X X X NA
Dual processors
Processor 1 P1DIMM slots
Channel 2 Channel 3
1A 2B 2A 3B
X X NA
X X NA
X X X NA
X X X NA
2. DIMM population must correspond to the above tables.
3. DIMM modules support 1 GB, 2 GB, 4 GB and 8 GB
DIMMS.
4. The size of each DIMM must be the same across the
configuration.
5. Do not mix UDIMMs with RDIMMs.
3A
NA
NA
Processor 2 P2DIMM slots
Channel 1 Channel 2
3A 1B 1A 2B
NA
NA X
NA X
NA X X X
3 System upgrades
Channel 3
2A 3B 3A
NA NA
X NA NA
X NA NA
X NA NA