Acer AR160 F1 Series User Manual page 83

Note: Only available when USB Functions is set to Disabled.
Otherwise, this item will be set to Enabled by the BIOS.
Legacy USB Support: Select Enabled to use Legacy USB devices. If set to
Auto, legacy USB support will be automatically enabled if a legacy USB
device is installed on the motherboard.
Note: Only available when USB Functions is set to Enabled.
USB 2.0 Controller Mode: This setting allows you to select the USB 2.0
Controller mode.
BIOS EHCI Hand-Off: Enable or disable BIOS Enhanced Host Controller
Interface support to provide a workaround solution for an operating
system that does not have EHCI Hand-Off support. When enabled, the
EHCI Interface will be changed from BIOS-controlled to OS-controlled.
IDE/SATA configuration
When this submenu is selected, the BIOS automatically detects the
presence of the IDE devices and displays the following items:
SATA#1 configuration: If Compatible is selected, it sets SATA#1 to
legacy compatibility mode, while selecting Enhanced sets SATA#1 to
native SATA mode.
• Configure SATA#1 as - This feature allows you to select the drive
type for SATA#1. The options are IDE, RAID and AHCI.
• ICH RAID Code Base - Select Intel or Adaptec to launch the
appropriate SATA RAID firmware to configure SATA RAID.
Note: Only available when RAID is selected in Configure SATA#1
as.
SATA#2 configuration: Selecting Enhanced will set SATA#2 to native
SATA mode.
Note: Only available when IDE is selected in Configure SATA#1 as.
67