Acer AR160 F1 Series User Manual page 117

4 Select the desired hard drive disk and then press INS to add it in
Selected Drives area.
5 Press Enter to complete the selection.
6 Select Array Type.
7 Configure the array properties.
8 Press Done when finish.
Press Y when prompted by "Do you want to create an array? (Yes/
9
No):".
10 Press any key to continue.
11 Now that the RAID volume is created, you can press ESC to exit.
Assigning Hot Spare drive
A hot spare is a hard disk drive that automatically replaces any failed
drive in a RAID volume, and can subsequently be used to rebuild the
RAID volume.
1 Select Array Configuration Utility option.
2 Select Add/Delete Hotspare.
3 The screen displays Select drives to assign Spare.
4 Select desired hard drive disk and then press INS to add it in
Assigned Hotspare drives area.
5 Press Enter to complete the selection.
6 Press Y when prompted by "Do you want to create a spare? (Yes/
No):" displayed.
7 Now a hot spare drive is created, you can press ESC to exit.
101