Remote Access Configuration - Acer AR160 F1 Series User Manual

80
192.168.10.253). The value of each three-digit number separated by
dots should not exceed 255.
Note: This feature can be changed by the user when the IP Source
is set to Static.
Subnet Mask: This item displays the current subnet mask setting for
your IPMI connection. This should be in decimal and in dotted quad
form (e.g., 192.168.10.253). The value of each three-digit number
separated by dots should not exceed 255.
Gateway Address: The BIOS will automatically display the Gateway
address of this machine. This should be in decimal and in dotted quad
form (i.e., 192.168.10.253). The value of each three-digit number
separated by dots should not exceed 255.
Mac Address: The BIOS will automatically enter the Mac address of this
machine. Mac addresses are 6 two-digit hexadecimal numbers (Based
16, 0 to 9, A, B, C, D, E, F) separated by dots. (e.g., 00.30.48.D0.D4.60).

Remote Access Configuration

Remote Access: This allows you to enable Remote Access support. If
Remote Access is set to Enabled, the following items will be displayed:
Serial Port Number: This feature allows the user to decide which serial
port to be used for Console Redirection. The options are COM 1 and
COM2.
4 System BIOS