Table of Contents
Advertisement
ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
3
or
2
or
3
2
6
997-457-000-8, Issue 8
January 2010
pulse response. This feature is required for VdS-
compliant operation only.
5.5.3.12
This option allows the panel to be configured to work
with a German or Swiss Fireman's Work Panel (FWP).
5.5.3.13
This option is used to control the way the Transmission
Device-triggered output, FWP 2, is activated by the
Fireman's Work panel (FWP).
This feature is required for VdS-compliant operation only.
5.5.3.14
Automatic detection of devices with the same address is
the default condition. If this facility is not required it may
be turned off using this menu option.
1 From the Setup menu screen, press the '
[Setup]
> : Change
2 Press the '
8
[Setup] Double Address Detection =
> : Change
5.5.3.15
The Transmission Device (TD) and Extinguishing System
(ES) outputs can be configured for automatic disablement
at access level 2 via the panel keyswitch or cover-off switch.
1 From the Setup menu screen, press the '
8
[Setup]
> : Change
2 Press the
[Setup]
> : Change
50
Fireman's Work Panel
FWP 2 Output Activation
Double Address Detection
the numeric keypad to enter the Device Options menu.
The Device blinking screen is displayed first. Press the
'
/
' buttons to step through the Device Options
2
8
until the LCD shows the Double Address Detection
menu.
Device Blinking = ON
: More
/
' buttons to step through the Device
2
8
Options until the LCD shows the Double Address
Deteaction menu.
TD/ES Disablement at Access Level 2
the numeric keypad to enter the Device Options menu.
Press the '
/
' buttons to step through the Device
2
8
Options until the LCD shows the TD/ES Auto Disable menu.
TD/ES Auto Disable =
button to select the TD/ES automatic
6
disbablement function. Press this button again to cancel.
TD/ES Auto Disable =
' button on
3
< : Exit
OFF
: More
< : Exit
' button on
3
No
: More
< : Exit
Yes
: More
< : Exit
Advertisement
Table of Contents
