Removing The System Main Board; Removing The I/O Port Bracket - Acer Veriton 5500 Service Manual

Removing the System Main Board

1. See "Removing the Housing Cover" on page 86
2. See "Removing a Dummy Link Bar" on page 87
3. See "Removing the AGP VGA Card" on page 88
4. See "Removing the Modem Card" on page 88
5. Before you remove the system main board, make sure that all cables connected to the main board are
removed.
6. Remove the eight screws as shown here and then detach the main board from the housing
.

Removing the I/O Port Bracket

1. See "Removing the Housing Cover" on page 86
2. See "Removing a Dummy Link Bar" on page 87
3. See "Removing the AGP VGA Card" on page 88
4. See "Removing the Modem Card" on page 88
5.
See "Removing the System Main Board" on page 97
6. Slide the bracket and then lift it up in the direction as shown.
97 Veriton 3500/5500/7500