Removing the Front Panel
1.
See "Removing the Housing Cover" on page 73
2.
Remove the four screws as shown here.
3.
Detach the front bezel from the front panel gently in the way as shown here.
Removing the AGP VGA Card
1.
See "Removing the Housing Cover" on page 73
2.
Remove the screw as shown here and then remove the AGP VGA card from the slot.
NOTE: There is no AGP VGA slot for Veriton 3500.
NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP
devices.
Chapter 3
74