Removing The Main Board; Removing The Power Supply; Removing The Intrusion Alarm - Acer Veriton 7200 Service Manual

Removing the Main Board

1.
See "Removing the Housing" on page 54. (Remove the left panel only)
2. Put the housing to lying position with the open area facing upward.
3. See "Removing the AGP VGA Card" on page 59
4. See "Removing the Modem Card" on page 59
5. Remove the six screws holding the main board and then remove the main board from the housing.

Removing the Power Supply

1. See "Removing the Housing" on page 54. (Remove the left panel only)
2. Disconnect the power supply power connector from the main board.
3. Remove the four screws holding the power supply, and then remove the power supply from the housing..

Removing the Intrusion Alarm

1. See "Removing the Housing" on page 54. (Remove the left panel only)
2. Remove the screw that secures the intrusion alarm and then remove it from the housing.
Chapter 3 60