Removing The Empty Cover; Removing A Dummy Link Bar; Removing A Link Bar - Acer Veriton 5500 Service Manual

Removing the Empty Cover

1. See "Removing the Housing Cover" on page 86
2. See "Removing the Front Panel" on page 86
3. Release the latches as shown here and then detach the empty cover from the front panel
.

Removing a Dummy Link Bar

4. See "Removing the Housing Cover" on page 86
5. To remove a link bar, remove the one screw that secures the link bar to the housing. Slide the dummy link
bar in the direction as shown here and then lift it up.
.

Removing a Link Bar

1. See "Removing the Housing Cover" on page 86
2. To remove a link bar, remove the screw that secures it to the housing. Slide the dummy link bar in the
direction as shown here and then lift it up.
NOTE: Before detaching the link bar from the housing, make sure that the cables connected to HDD and FDD
are detached.
87 Veriton 3500/5500/7500