Removing The System Main Board; Removing The I/O Port Bracket - Acer Veriton 7600G Service Manual

Removing the System Main board

1. See "Removing the Housing Cover" on page 72
2. See "Removing the FDD and DVD Frame" on page 74
3. See "Removing the AGP VGA Card" on page 73
4. See "Removing the LAN Card" on page 74
5. Before you remove the system main board, make sure that all cables connected to the main board are
removed.
6. Remove the eight screws as shown here then detach the main board from the lower case.

Removing the I/O Port Bracket

1. See "Removing the Housing Cover" on page 72
2. See "Removing the FDD and DVD Frame" on page 74
3. See "Removing the AGP VGA Card" on page 73
4. See "Removing the LAN Card" on page 74
5. See "Removing the System Main board" on page 83
6. Release the I/O port bracket from the housing and then detach it from the housing..
83 Chapter 3