The following table describes the parameters found in the sub-menu. Settings in boldface are the default and
suggested settings.
Parameter
UART Mode Select
UR2 Duplex Mode
TxD, RxD Polarity Active
Use IR Pins
Power Management Setup
Selecting "Power Management Setup" from the Advanced Options menu displays the following screen:
Chapter 2
Description
Selects the UART as Serial Port (Normal) or IRDA or
ASKIR.
Selects the speed of UR2 Duplex Mode.
Selects the speed of TxD, RxD Polarity Active.
Use IR Pins as IR-Rx2Tx2 or RxD2, TxD2
Option
Normal
IrDA
ASKI
Half
Full
Lo, Hi
Lo, Lo
Hi, L
Hi, H
IR-Rx2Tx2
RxD2, TxD2
66