Lockout Count; Brownout Override - Bryant Evolution Connex Control SYSTXBBECC01-C Installation Instructions Manual

6.3.7.2. Lockout Count

This setting controls the number of times within an hour that the HPS or
LPS trips before the Geo HP compressor will lockout for four hours.
After the selection is made, touch SAVE.
• Lockout Count: 4 or 2
• Default = 2

6.3.7.3. Brownout Override

This option controls the low voltage brownout override function in the
Geo HP unit. After the selection is made, touch SAVE.
• Brownout Override: Active or Inactive. Default = Inactive
50
A150179
A150180