Table of Contents
Advertisement
4. Select option 2 (upper case ASCII code) and press Enter .
5. Write down the generated master password.
6. Reboot the computer.
7. In the HDD password prompt, type the master password generated in step 5, then press
Enter .
Removing the BIOS Passwords
To clear a lost BIOS password (user or supervisor password), you need to short the clear
password hardware gap (G2201) located on the mainboard. Refer to the
Passwords" on page
Figure 2-14. G2201 Hardware Gap
System Utilities
5-5
section for detailed instructions.
0
"Clearing the BIOS
2-15
Advertisement
Table of Contents
