Table of Contents
Advertisement
Figure 2-4. Set Supervisor Password
2. Type a new password in the Enter New Password field and press Enter . Passwords
are not case sensitive and the length must not exceed eight alphanumeric characters
(A-Z, a-z, 0-9).
3. Retype the password in the Confirm New Password field and press Enter .
IMPORTANT:
4. Press Enter .
NOTE:
NOTE:
Users can choose to enable the Password on Boot parameter.
5. Press F10 to save changes and exit from the BIOS Setup Utility .
2-8
Set Supervisor Password
Enter New Password
Confirm New Password [
Use care when typing a password. Characters do not appear on the screen.
[
]
]
System Utilities
Advertisement
Table of Contents
