Removing the Touchpad Board
1. Perform the
"Removing the Palmrest Module/Upper
page 3-22.
2. Perform the
"Removing the Click Button with
3. Insert a small flat-blade screwdriver between the touchpad board and the upper cover,
and carefully pry the board loose. Remove the touchpad board from the palm rest.
Figure 3-39. Touchpad Board Remove
NOTE:
NOTE:
A circuit board that is > 10cm
Figure
3-39. Follow the local regulations for disposing this type of circuit board.
3-30
Cover" procedure described on
Bracket" procedure described on page 3-28.
2
has been highlighted with a yellow rectangle in
Machine Maintenance
0