Removing the Speaker
1. Perform the
"Removing the Palmrest Module/Upper
preceding section.
2. Disconnect the speaker cable from the power button board.
Figure 3-40. Speaker Cable
3. Remove the screws securing the speaker and lift to remove the speaker from the system.
Figure 3-41. Speaker Screws
Table 3-13. Screws
Step
Speakers Disassembly
Figure 3-42. Speaker Screws
Machine Maintenance
Cover" procedure described on the
Screw
M2.5 x L7
Quantity
Screw Type
2
0
3-31