Table of Contents
Advertisement
External Module Reassembly Process
Replacing the Memory Modules
1. Insert the memory module at a 30° angle into the DMI memory slot (1) and then press it
down until it clicks into place (2).
The module is keyed so it can only be inserted in one direction. If the module does not fit,
make sure that the notch in the module lines up with the tab in the memory slot.
Figure 3-123. DM1 Slot Module
2. If a second memory module is available, install it in the DM2 slot by repeating step 1.
Figure 3-124. DM2 Slot Module
Machine Maintenance
0
0
3-79
Advertisement
Table of Contents
