Table of Contents
Advertisement
Chapter 1
Introduction
▪ Exceeds NEMA TS-2 (traffic control equipment)
• -40 to 85 °C (-40 to 185 °F) operating temperature (no fans)
• Failsafe output relay: for crtical failure or error alarming
• 18 AWG galvanized steel enclosure and 48 cm (19 in) rack-mount adapter
Universal Power Supply Options
• Fully integrated power supplies
• Input voltage range of 10-59 VDC, 88-300 VDC or 85-264 VAC for worldwide operability
• Optional dual redundant, parallel load-sharing power supplies for increased network availability
• Can be powered from different sources for ultimate redundancy
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Physical Ports
• Ethernet Options (up to 4 ports): 10/100Base-TX, 100Base-FX
• Cellular Modem
• WAN Port Options (up to 8 ports):
▪ T1/E1 (channelized/unchannelized) supports 2 Mbps G.703 with 120 Ω balanced connections
▪ PPPoE/Bridged Ethernet via ADSL
▪ T3 DS3
▪ 56 Kbps DDS
• Serial Ports (up to 8 ports):
▪ Fully compliant EIA/TIA RS485, RS422, RS232 software selectable serial ports with RJ45 connectors
▪ Raw socket mode support allows conversion of any serial protocol
• Embedded Modem Port
• Precision Time Protocol (PTP): Accurate time synchronization using NTP, IRIG-B and/or IEEE1588
Protocols
• WAN
▪ Frame Relay RFC 1490 or RFC 1294
▪ PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication
▪ PPPoE over DSL
▪ GOOSE messaging support
• IP
▪ Routing: VRRP, OSPF, RIP, BGP
▪ DHCP Agent (Option 82 capable)
▪ Traffic prioritization, NTP Server, IP Multicast Routing
Frame Relay Support
• ISO and ITU compliant, network certified
• ANSI T1.617 Annex D, Q.933 or LMI Local Signalling
2
RUGGEDCOM RX1100
Installation Guide
Feature Highlights
Advertisement
Table of Contents
