TYAN Tank GT20 Service Engineer's Manual page 72

4. a: Inset the cable into the rear of HDD tray. b: Connect
the cable to M3290. c: Insert and secure HDD tray.
5. Arrange and connect the cable to SMDC connector on
mainboard. Be careful not to block the air flow.
Installing M3290/M3291 into GT20 Chassis
NOTE: The products produced now may not support the pro-
cedures below. We'll provide you with the upgraded models
as soon as possible.
1. Disconnect the power connectors on HDD backplane and
M1012.
2. Push the power cables aside.
64