Table of Contents
Advertisement
About this Manual
This manual provides you with instructions on installing your
Tank GT20. This manual is intended for experienced users and inte-
grators with hardware knowledge of personal computers.
This manual consists of the following parts:
Chapter 1:
Chapter 2:
Chapter 3:
Appendix:
or SMDC setting up, please refer to Appendix III.
For information on the mainboard, please refer to the attached main-
board user's manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
Provides an Introduction to the Tank GT20 B5191
barebone, packing list, describes the external
components, gives a table of key components,
and provides block diagrams of the system.
Covers procedures on installing the CPU, mem-
ory module, PCI card, and hard drive.
Covers removal and replacement procedures for
pre-installed components
Describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup. F+
iii
Advertisement
Table of Contents
