Accessories; Filter; Humidifier; Ultraviolet Lights - Bryant Evolution Connex Control Installation Instructions Manual

equipment, since duct system changes may occur at any time, such as opened or closed
registers.
This option allows the installer to select the time in which the duct assessment will be
performed. After the selection is made, touch SAVE.
• Duct Assessment Time: Selectable between 12 AM and 11PM. Default = 1 PM

6.3.9. Accessories

First touch SETUP, then touch ACCESSORIES to set up the parameters for the accessories
installed with the system.

6.3.9.1. Filter

NOTE: The daily duct assessment will occur even if static pressure monitoring is disabled. This
is done to ensure that the system will continue to provide proper airflow for all installed
equipment, since duct system changes may occur at any time, such as opened or closed
registers.
With this option, the installer has the option of selecting pressure monitoring, the type of filter
installed, and the time interval for cleaning. After the selections are made, touch SAVE.
• Pressure Monitoring (not available or effective with air cleaners that do not use filter media,
such as Electric Air Cleaners): Enable or Disable. Default = Enable
• Clean Interval: Selectable from 1 to 18 months. Default = 3 months
• Filter Type: Air Filter, Electric Air Cleaner or Air Purifier. Filter type is selected during
installation; otherwise default = air filter

6.3.9.2. Humidifier

With this option, the installer has the option of selecting whether a humidifier is installed, to
humidify with the fan in low speed, and the time interval for changing the humidifier pad. After
the selections are made, touch SAVE.
• Humidifier Installed: Yes or No. Humidifier selection made during installation; otherwise
default = No
• Change Pad: Selectable from 1 to 24 months. Default = 12 months
• Humidify with Fan: Yes or No. Default = No

6.3.9.3. Ultraviolet Lights

With this option, the installer has the option of selecting whether ultraviolet lights are installed,
and the time interval for changing the ultraviolet lights. After the selections are made, touch
SAVE.
• UV Lights Installed: Yes or No. UV Lights selection made during installation; otherwise
default = No
• Change Interval: Selectable from 1 to 48 months. Default = 12 months
38