Table of Contents
Advertisement
– The shutdown function may not be immediate. Blower off delays, etc., will still be used.
The shutdown is not intended for commercial applications. If immediate shutdown is
required, provision must be made to remove power to indoor unit.
6.3.2.5. Fan Coil G-Terminal Alert
Use the alert function to select the contact state for an alert. Select Normally Open or
Normally Closed, and then save your selection.
Shutdown: This setup option selects the change of state required for shutdown. Select
Normally Open or Normally Closed, and then save your selection.
6.3.2.6. Fan Coil G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main screen and in the
notification email when the alert becomes active.
27
A13229
A13230
A14224
Advertisement
Table of Contents
