Table of Contents
Advertisement
Major operating controls and their functions
Rear view
➀
➂
① Power cord inlet [AC IN]
Connect the provided power cord to this inlet. The
power plug of the recorder is 2-prong plug equipped
with a grounding terminal.
How to prevent power cord
disconnection
Fix a 15 cm ~ 20 cm space from the power cord connector with
the attached cable clamp passed through the clamp mount.
① Pass the cable clamp (provided) through the clamp
mount.
15 cm ~ 20 cm
② Tighten the power cord at 15 cm to 20 cm from the
connector and fix it to the clamp mount.
Cut the surplus part of the cable clamp as necessary.
➁
➃
➄
⑥
Cable clamp
Clamp mount
①
②
(continued)
⑦
⑧
⑨ ⑩
⑪ ⑫
② SIGNAL GND terminal [SIGNAL GND]
Connect this terminal with the SIGNAL GND terminals of
the devices in the system for signal ground. When
operating the recorder and the devices in the system
without signal ground, noise may be produced.
③ Clamp mount (To prevent power cord
disconnection)
④ Clamp mount (For terminal cable clamps)
⑤ Alarm/Control connector B [B]
It is used when connecting an alarm, such as a buzzer
or a lamp, to external equipment.
The provided terminal plug (10 pin) is attached.
⑥ Alarm/Control connector A [A]
It is used when connecting with an external device such
as a sensor or anti-theft door switch that output alarm
signals.
The provided terminal plug (11 pin) is attached.
⑦ Copy port (USB3.0) [COPY]
Connect an external storage device (external Hard disk
drive, USB memory) to this port and copy images and
audio recorded on the hard disk drive. An external
storage device can also be connected to the copy port
on the front. Use either of them.
* Mouse connection is also available.
⑧ Mouse connection port (USB2.0) [MOUSE]
The provided mouse is connected to this port. The
mouse can be connected to the mouse connection
ports on the front. Use either of them.
⑨ Network port (PC port) [PC]
Connect the recorder with a PC via a network compati-
ble with 10BASE-T, 100BASE-TX or 1000BASE-T. Use
this port when the cameras and the PC are connected
to different network.
16
⑬
⑭
⑮
Advertisement
Table of Contents
