Table of Contents
Advertisement
Camera Operation
(Optional)
When an optional camera is connected, the view video of camera can be
output to the monitor.
Rear camera:
If a rear camera is connected, when the vehicle is reversed, the rear
camera view (guide marks for vehicle width and available distance) is
displayed automatically on the screen of this unit.
You can adjust the quality of the camera image.
Setting items: Brightness / Color / Contrast
See "Camera Picture Quality Setup" (page 16).
Camera Operation
Displaying the Camera Image from the HOME
screen
1
Touch the
(HOME) button.
The HOME screen is displayed.
• If [Camera Select] is set to [Off] (page 15), the [Rear Camera]
button cannot be selected.
2
Touch [Rear Camera].
• Touch [
] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment for the rear view image. For
details, see "About the Rear Camera Guide" (page 35).
Displaying the rear view video while the car is
in reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than reverse
(R), the monitor returns to the previous screen.
• Never depend solely on the camera when backing up. Always turn and
look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
• Touch [
] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment for the rear view image. For
details, see "About the Rear Camera Guide" (page 35).
About the Rear Camera Guide
To display the guide, set "Turning the Rear Camera Guide On/Off "
(page 16) to On. Also, to adjust the guide, see "Rear Camera Guide
Settings" (page 16).
When the car is put into reverse gear, the monitor switches to the rear
view camera image. Guides appear to help visualize the car's width and
distance from the rear bumper.
[Rear Camera] button
• Depending on the condition of the car or road surface, the range of
• The camera has a limited range of vision. Objects at extreme angles to
• The rear camera image may have a tint which is different from the
• Depending on the car, the guidance may deviate to the right or left. This
Indication mark meaning
Car width extension lines (red, yellow and green in order
of distance)
If properly calibrated, the marks indicate the car's width. This
helps guide the car's path when backing up in a straight line.
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• Set the marks to suit the car's width.
Distance guidance lines
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• We recommend that you measure the actual distance to the
marks when parked on a level surface.
vision may vary.
the camera (e.g. under the bumper or at opposite ends of the bumper)
may not be in the its field-of-vision.
actual surroundings.
is not a malfunction.
35
-EN
Advertisement
Table of Contents
