Table of Contents
Advertisement
Camera Operation
(Optional)
When an optional rear camera is connected, the view video of camera
can be output to the monitor.
Rear camera:
If a rear camera is connected, when the vehicle is reversed, the rear
camera view (guide marks for vehicle width and available distance) is
displayed automatically on the screen of this unit.
You can adjust the quality of the camera image.
Setting items: Brightness / Color / Contrast
See "Picture Quality Setup" (page 36).
Rear Camera Operation
Displaying the Rear Camera Image from the
Menu screen
1
Press the
(MENU) button.
The menu screen is displayed.
[Camera] button
• You can also display the menu screen by touching the lower part of
the Audio source screen or by swiping upward.
2
Touch [Camera].
The Rear Camera view is displayed.
• Touch the screen while the camera image is being displayed, and touch
[
] or [ ] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear Camera Guide" (page 43).
Displaying the rear view video while the car is
in reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than reverse
(R), the monitor returns to the previous screen.
• Never depend solely on the camera when backing up. Always turn and
look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear Camera Guide" (page 43).
76
-EN
Guide Display ON/OFF Setting
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [Guide Off] or [Hitch Guide Off] on the Rear
camera display screen.
The guide disappears, and then the [Guide Off] or [Hitch Guide
Off] switch changes to [Guide On] or [Hitch Guide On].
3
Touch [Guide On] or [Hitch Guide On] to turn on the
guide.
Adjusting the Caution Display Location
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [
Caution].
• For each touch, the caution location moves to the top or bottom of the
screen.
About the Rear Camera Guide
To display the guide, set "Guide Display ON/OFF Setting" (page 76) to
On. Also, to adjust the guide, see "Adjusting the Rear Camera Guide"
(page 43). You can also turn off the guide in the Rear camera display
screen.
Indication mark meaning
When the car is put into reverse gear, the monitor switches to the rear
view camera image. Guides appear to help visualize the car's width and
distance from the rear bumper.
Car width extension marks (red, yellow and green in
order of distance)
If properly calibrated, the marks indicate the car's width. This
helps guide the car's path when backing up in a straight line.
The marks represent the distance from the rear of the car (from
the rear end of the bumper).
• The marks do not move in synchronization with the steering
wheel.
• Set the marks to suit the car's width.
Advertisement
Table of Contents
