Starting Cold Engine - Echo PB-770 H Operator's Manual

Hide thumbs Also See for PB-770 H:
Table of Contents

Advertisement

OPERATION
Stored two-stroke fuel may separate. ALWAYS shake fuel container
thoroughly before each use.
Used oil and gasoline, and soiled towels are hazardous waste
materials. Disposal laws vary by locality.

Starting Cold Engine

• Recoil starter: Use short pulls - only 1/2- 2/3 of rope length for starting.
Do not allow the rope to snap back in. Always hold the unit firmly.
• (PB-770H): Rotate spring loaded throttle arm downward to a comfortable
operating position.
1.
Throttle Position Lever
Move throttle position lever (A) to
IDLE position.
2.
Choke
Move choke (C) UP to COLD
START (
3.
Purge Bulb
Pump purge bulb (D) until fuel is
visible. Pump bulb an additional 4
or 5 times.
4.
Recoil Starter
Pull recoil starter handle (E) until engine fires, or a maximum of 5 pulls
5.
Choke
After engine fires (or 5 pulls), move choke lever back to RUN (
position, then pull starter handle/rope until engine starts and runs. Allow
unit to warm up at idle for several minutes.
26
) position.
PB-770 H
PB-770T
A
D
© 01/2020 ECHO Incorporated
PB-770 H/T
A
C
E
)
X7531125807

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pb-770 tPb-770 series

Table of Contents