Operation; Starting Cold Engine - Echo PB-231LN Operator's Manual

Hide thumbs Also See for PB-231LN:

Table of Contents

PERATION

• Provide all operators of this equipment with the Operator's Manual

and instructions for safe operation.

• Before starting the unit, equip yourself and any other person working

within the 15m (50 ft.) Safety Zone with the required Protective

Equipment and clothing.

• Do not operate this product indoors or in inadequately ventilated

areas.

1. Stop Switch - Start/Run.

Move stop switch button (A) away from the STOP position.

2. Move throttle position lever (B) midway between idle and full

throttle positions.

3. Close Choke - Cold Start.

Move choke (C) to "Cold Start" Position.

4. Purge Bulb -Pump.

Pump primer bulb (D) until fuel is visible and flows freely in the

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

IMPORTANT

Recoil starter: Use short pulls - only 1/2-2/3 of rope for starting.

Do not allow the rope to snap back in. Always hold the unit

firmly.

(50 ft.)

15m

Table of Contents