Shifting Into Park - Pontiac 2009 Vibe Owner's Manual

Hide thumbs Also See for 2009 Vibe:
Table of Contents

Advertisement

To release the parking brake, hold
the brake pedal down. Pull the
parking brake lever up until you can
press the release button. Hold the
release button in as you move the
lever all the way down.
Notice: Driving with the parking
brake on can overheat the brake
system and cause premature wear
or damage to brake system parts.
Make sure that the parking brake
is fully released and the brake
warning light is off before driving.
If you are towing a trailer, see
Towing a Trailer on page 9-77.

Shifting Into Park

{
CAUTION
It can be dangerous to get out of
the vehicle if the shift lever is not
fully in P (Park) with the parking
brake firmly set. The vehicle can
roll. If you have left the engine
running, the vehicle can move
suddenly. You or others could be
injured. To be sure the vehicle will
not move, even when you are on
fairly level ground, use the steps
that follow. If you are pulling a
trailer, see Towing a Trailer on
page 9-77.
Driving and Operating
To shift into P (Park), do the
following:
1. Hold the brake pedal down
and set the parking brake.
See Parking Brake on page 8-12
for more information.
2. Move the shift lever into P (Park)
by pushing the lever all the way
toward the front of the vehicle
and to the left.
3. Turn the ignition key to
LOCK/OFF.
4. Remove the key and take it with
you. If you can leave the vehicle
with the key in your hand, the
vehicle is in P (Park).
8-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents